导电油墨及其应用技术进展

doi:10.7517/j.issn.1674-0475.2014.04.393

摘要/Abstract

摘要：

印刷电子是将传统印刷工艺应用于电子产品制造的新型工艺技术，导电油墨是印刷电子关键材料之一，受到了人们的广泛关注。为了全面了解并把握导电油墨及其应用发展动态，本文结合近年来导电油墨领域文献及研究工作情况，综合分析了导电油墨的分类、构成以及其印刷工艺技术和印刷装备情况，指出导电油墨的主要发展方向在于既要开发新型功能材料（如碳纳米管、石墨烯等）在导电油墨中的应用技术，又要提高印刷成膜后导电材料间的互联性能，解决印刷电路与其它器件间的连线问题。

关键词: 导电油墨, 印刷电子, 印刷工艺, 印刷电子材料, 印刷电子器件

Abstract:

Printed electronics is a new and fast developing technology which applying the traditional printing technology into the electronic products manufacturing. And the printed electronics has broad prospects for development. Conductive ink, as the key materials and foundation of printed electronics, has attracted widespread attention. In this paper, the category, basic composition, used printing technologies and device of the conductive ink are overviewed. The research and developing trends of conductive ink are also expected. Firstly, applying of new functional materials (including CNT, grapheme, et al.) into conductive ink and improving the intrinsic and interconnected properties of such materials is one of the key problems. Meanwhile, solving the problem of interconnecting between the printed circuits and electronic devices is another key problem of conductive ink.

Key words: conductive ink, printed electronics, printing process, printed electronics materials, printed electronics device

李路海, 莫黎昕, 冉军, 辛智青. 导电油墨及其应用技术进展[J]. 影像科学与光化学, 2014, 32(4): 393-401.

LI Luhai, MO Lixin, RAN Jun, XIN Zhiqing. Conductive Ink and Its Application Technology Progress[J]. Imaging Science and Photochemistry, 2014, 32(4): 393-401.

参考文献

[1] 邹竞.中国印刷电子产业政策调研报告.中国工程院.2013. Zou J. China printing electronic industrial policy research report[R]. Chinese Academy of Engineering. 2013.
[2] IDTechEx. Conductive Ink Markets. 2012-2018.
[3] 田芊,毛献辉,孙利群. 光电子技术及其进展[J].应用光学,2002,23(1):1-4. Tian Q, Mao X H, Sun L Q. Optoelectronic technology and its advances[J]. Journal of Applied Optics, 2002, 23(1): 1-4.
[4] 金成勋,李丹丹,余愿,徐涛,钱俊,只金芳.柔性透明石墨烯膜制备及导电性能研究[J]. 影像科学与光化学,2012,30(4):289-298. Kim S H, Li D D, Yu Y, Xu T, Qian J, Zhi J F. A hybrid reduction procedure for preparing flexible transparent graphene flims with improved electrical properties [J]. Imaging Science and Photochemistry, 2012, 30(4):289-298.
[5] 刘振, 徐文亚, 钱龙, 赵建文, 崔铮.印刷半导体碳纳米管薄膜晶体管光电性能研究[J].影像科学与光化学,2014, 32(3):260-266. Liu Z, Xu W Y, Qian L, Zhao J W, Cui Z. Optical and electrical properties of printed thin-film transistors based on poly[2,7-(9,9-dioctylfluorene)-alt-4,7-bis(thiophen-2-yl)benzo-2,1,3-thiadia-zole](PFO-DBT) sorted semiconducting single-walled carbon nanotubes [J]. Imaging Science and Photochemistry, 2014, 32(3):260-266.
[6] Kim D J, Moon J H. Highly conductive ink jet printed films of nanosilver particles for printable electronics [J]. Electrochemical and Solid-state Letters, 2005, 8(11): J30-J33.
[7] Lee H H, Chou K S, Huang K C. Inkjet printing of nanosized silver colloids [J]. Nanotechnology, 2005, 16(10): 2436-2441.
[8] Huang D, Liao F, Molesa S, Redinger D, Subramanian V. Plastic-compatible low resistance printable gold nanoparticle conductors for flexible electronics [J]. Journal of the Electrochemical Society, 2003, 150(7): G412-G417.
[9] Li Y, Wu Y, Ong B S. Facile synthesis of silver nanoparticles useful for fabrication of high-conductivity elements for printed electronics [J]. Journal of the American Chemical Society, 2005, 127(10): 3266-3267.
[10] Park B K, Kim D, Jeong S, Moon J, Kim J S. Direct writing of copper conductive patterns by ink-jet printing[J]. Thin Solid Films, 2007, 515: 7706-7711.
[11] Nguyen B T, Gautrot J E, Nguyen M T, Zhu X X. Nitrocellulose-stabilized sliver nanoparticles as low conversion temperature precursors useful for inkjet printed electronics [J]. Journal of Materials Chemistry, 2007, 17: 1725-1730.
[12] Bieri N R, Chung J, Poulikakos D, Grigoropoulos C P. Manufacturing of nanoscale thickness gold lines by laser curing of a discretely deposited nanoparticle suspension[J]. Superlattices and Microstructures, 2004, 35: 437-444.
[13] Volkman S K, Pei Y, Redinger D, Yin S, Subramanian V. Ink-jetted silver/copper conductors for printed RFID applications [J]. Materials Research Society Symposium Proceedings, 2004, 814: 151-156.
[14] Wu Y, Li Y, Liu P, Gardner S, Ong B S. Studies of gold nanoparticles as precursors to pinted conductive features for thin-film transistors [J]. Chemistry of Materials, 2006, 18: 4627-4632.
[15] Lee K J, Jun B H, Kim T H. Direct synthesis and inkjetting of silver nanocrystals toward printed electronics[J]. Nanotechnology, 2006, 17(9): 2424-2428.
[16] 李伟伟.适用于非吸收介质的凹印导电油墨研究[D].北京:北京印刷学院,2012. Li W W. Study on the gravure printed conductive ink suitable for the non-absorbed substrate[D]. Beijing:Beijing Instictute of Graphic Communication, 2012.
[17] Kholmanov I N, Magnuson C W, Aliev A E, Li H, Zhang B, Suk J W, Zhang L L, Peng E, Mousavi S H, Khanikaev A B. Improved electrical conductivity of graphene films integrated with metal nanowires [J]. Nano Letter, 2012, 12: 5679-5683.
[18] Shirakawa H, Mcdiarmid A, Heeger A. Twenty-fiveyears of conducting polymers[J]. Chemical Communications, 2003, (1): 1-4.
[19] 陈雷,于洁. 导电油墨的制备与性能研究.化学与生物工程,2008,25(7): 25-26. Chen L, Yu J. Study on preparation and properties of modified epoxy resinbased conductive ink for flexible printed circuits [J]. Chemistry Bioengineering, 2008, 25(7): 25-26.
[20] Sariciftci N S, Smilowitz L, Heeger A J, Wudi F. Photoinduced electron transfer from a conducting polymer to buckminsterfullerene[J]. Science, 1992, 258(5087): 1474-1476.
[21] 莫黎昕.导电油墨构成与导电性能关系的研究[D].北京:北京印刷学院,2008. Mo L X. Study on the compositions and conductive properties of conductive inks[D]. Beijing:Beijing Institute of Graphic Communication, 2008.
[22] Li L H, Xin Z Q, Zhao W, Tang X J, Du P, Hu X W, Leng X. Research of transparent conductive film prepared with polymer [J]. Materials Science Forum, 2010, 663-665: 532-537.
[23] Minhun J, Jaeyoung K, Jinsoo N, Namsoo L, Chaemin L, Gwangyong L, Junseok K, Hwiwon K, Kyunghwan J, Leonard AD, Tour J M, Gyoujin C. All-printed and roll-to-roll-printable 13.56-MHz-operated 1-bit RF tag on plastic foils[J]. IEEE Transactions on Electron Devices, 2010, 57(3):571-580.
[24] Li W W, Mo L X, Fu J L, Li W B, Ran J, Fan X M, Li Y L, Li L H. Preparation of water-based nano-silver gravure conductive ink used for printed electronics[J]. Applied Mechanics and Materials, 2012, 262:523-526.
[25] 冉军.纳米银栅格碳材料复合透明导电膜印制及性能研究[D].北京:北京印刷学院,2014. Ran J. Preparation and application performance of nano-Ag grids/carbon nanotubes hybrid TCFs[D]. Beijing:Beijing Institute of Graphic Communication, 2014.
[26] Ko S H, Pan H,Grigoropoulos C P, Luscombe C K,Frechet M J, Poulikakos D. All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticles[J]. Nanotechnology, 2007, 18(34):5202-5210.
[27] Dearden A L, Smith P J, Shin D, Reis N,Derby B,O'Brien P. A low curing temperature silver ink for use in ink-jet printing and subsequent production of conductive tracks [J]. Macromolecular Rapid Communications, 2005, 26(4):315-318.
[28] Grouchko M, Popov I, Uvarov V, Magdassi S, Kamyshny A. Coalescence of silver nanoparticles at room temperature: unusual crystal structure transformation and dendrite formation induced by self-assembly[J]. Langmuir, 2009, 25(4): 2501-2503.
[29] Magdassi S , Grouchko M , Toker D, Kamyshny A, Balberg I, Millo O. Ring stain effect at room temperature in silver nanoparticles yields high electrical conductivity[J]. Langmuir, 2005, 21(23):10264-10267.
[30] Grouchko M, Kamyshny A, Mihailescu C F, Anghel D F and Magdassi S. Conductive inks with a "built-in" mechanism that enables sintering at room temperature [J]. ACS Nano, 2011, 5(4):3354-3359.
[31] Valeton J J P, Hermans K, Bastiaansen C W M, Broer D J, Perelaer J, Schubert U S, Crawford, Smith. Room temperature preparation of conductive silver features using spin-coating and inkjet printing [J]. Journal of Materials and Chemistry, 2010, 20(3):543-546.
[32] Li D P, Sutton D, Burgess A, Graham D, Calvert P D. Conductive copper and nickel lines via reactive inkjet prin-ting[J]. Journal of Materials and Chemistry, 2009, 19(22):3719-3724.
[33] 莫黎昕.保护剂对纳米银喷墨导电墨水性能的影响研究.天津:天津大学,2011. Mo L X. Study on the effects of protective agents on the properties of nano-Ag inkjet conductive inks[D]. Tianjin: Tianjin University, 2011.
[34] Xia Y N, Rogers J A, Paul K E, Whitesides G M. Unconventional methods for fabricating and patterning nanostructures[J]. Chemical Reviews, 1999, 99(6):1823-1848.
[35] Kim E, Xia Y N, Whitesides G M. Polymer microstructure formed by molding in capillaries[J]. Nature, 1995, 376(6541):581-584.
[36] Zhao X M, Xia Y N, Whitesides G M. Fabrication of three-dimensional micro-structures: microtransfer molding[J]. Advanced Materials, 1996, 8(10):837-840.