The Influence of Aqueous Medium on Surface Properties of Ultraviolet Cured Acrylates

doi:10.7517/j.issn.1674-0475.2008.05.377

Abstract

Abstract: Photosensitive resin containing special probe reagent was UV cured in water,and surface energy of the cured film was measured.It was found that the surface energy of the film cured in water is higher than that of cured in air.The results of XPS revealed that the movement of probe reagent is different when cured in different mediums,and the difference of surface properties is resulted from the molecular migration and conformational change of the component.

Key words: curing medium, surface energy, component migration, conformational change, XPS analysis

CLC Number:

MA Guo-jie, WANG De-hai, HE Xi-ting. The Influence of Aqueous Medium on Surface Properties of Ultraviolet Cured Acrylates[J]. Imaging Science and Photochemistry, 2008, 26(5): 377-384.

References

[1] Luan B,Liu X Y,Nagata J,et al.Residual stress analysis--an important consideration for coating of stereolithography polymers[J].Surface and Coatings Technology,2005,192(2-3):323-330.
[2] Nagasawa A,KitanoT,WatanabeT,et al.Control of surface free energy for surface modification by using photocurable resin and surface modifier[J].Sen'i Gakkaishi,2004,60(6):183-187.
[3] Bongiovanni R,Malucelli G,Priola A.Modification of surface properties of UV-cured films in the presence of long chain acrylic monomers[J].Journal of Colloid and Interface Science,1995,171(2):283-287.
[4] Bertsch A,lorenz H,Renaud P.3D microfabrication by combining microstereolithography and thick resist UV lithography[J].Sensors and Actuators A:Physical,1999,73(1-2):14-23.
[5] 骆燕,王德海.固化氛围对丙烯酸酯紫外光固化材料表面性能的影响[J].辐射研究与辐射工艺学报,2007,(1):15-18.Luo Y,Wang D H.Influence of curing environment on surface properties of ultraviolet cured acrylates[J] J.Radiat.Res.Radiat.Process,2007,(1):15-18.
[6] 王德海,骆燕,蔡延庆.探针组分对紫外光固化材料表面性能的影响[J].辐射研究与辐射工艺学报,2006,(4),214-218.Wang D H,Luo Y,Cai Y Q.Effect of the probe components on the surface properties of the UV cured materials[J].J.Rodiat.Res.Radiat.Process,2006,(4):214-218.
[7] 骆燕,王德海,蔡延庆.丙烯酸酯紫外光固化材料表面的XPS研究[J].感光科学与光化学(影像科学与光化学),2006,24(6),428-435.Luo Y,Wang D H,Cai Y Q.XPS study of the surface of UV cured acrylates[J].Photographic Science and Photochemistry(Imaging Science and Photochemistry),2006,24(6):428-435.
[8] Owens D K,Wendt R C.Estimation of the surface free energy of polymers[J].Journal of Applied Polymer Science,1969,13(8):1741-1747.
[9] Asif A,Huang C Y,Shi W F.UV curing behaviors and hydrophilic characteristics of UV curable waterborne hyperbranched aliphatic polyesters[J].Polymers for Advanced Technologies,2003,14(9):609-615.
[10] Fowkes F M.Additivity of interrmolecular forces at interfaces.1.Determination of the contribution to surface and interfacial tensions of dispersion forces in various liquida[J].Phys.Chem,1963,67:2538-2541.
[11] 吴宁晶,黄礼凯,郑安呐,等.聚苯乙烯/聚二甲基硅氧烷嵌段与接枝共聚物表面聚集态的研究[J].高分子学报,2005,(1):137-141.Wu N J,Huang L K,Zheng A N,et al.Surface study of block and graft eopolyrners of polystyren-polydimethylsiloxane[J].Acta Polymerica Sinica,2005,(1):137-141.
[12] Chattopadhyay D K,Panda S S,Raju K V S N.Thermal and mechanical properties of epoxy acrylate/methacrylates UV cured coatings[J].Progress in Organic Coatings,2005,54(1):10-19.
[13] Kassis C M,Steehler J K,Betts D E,et al.XPS studies of fluorinated acrylate polymers and block oopolymers with polystyrene[J].Macromolecules,1996,29:3247-3254.
[14] Wulf M,Uhlmann P,Michel S,et al.Surface tension studies of levelling additives in powder coatings[J].Progress in Organic Coatings,2000,38(2):59-66.
[15] Grundke K,Michel S,Osterhold M.Surface tension studies of additives in acrylic resin-based powder coatings using the Wilhelmy balance technique[J].Progress in Organic Coatings,2000,39(2-4):101-106.
[16] Sangermano M,Bongiovanni R,Malucelli G,et al.Fluorinated epoxides as surface modifying agents of UV-curable systemas[J].Applied Polymer Science,2003,89(6):1524-1529.