影像科学与光化学 ›› 2005, Vol. 23 ›› Issue (1): 14-20.DOI: 10.7517/j.issn.1674-0475.2005.01.14

• 研究论文 • 上一篇    下一篇

室温水解法制备介孔二氧化钛的表征及应用

张雪红1,2, 罗来涛1   

  1. 1. 南昌大学, 化学系, 江西, 南昌, 330047;
    2. 南昌航空工业学院, 环化系, 江西, 南昌, 330034
  • 收稿日期:2004-08-01 修回日期:2004-09-08 出版日期:2005-01-23 发布日期:2005-01-23
  • 通讯作者: 张雪红,E-mail:zxh114079@sina.com;罗来涛,E-mail:luolaitao@163.com.

Characterization and Application of Mesoporous Titanium Dioxide Prepared by Normal Temperature Hydrolysis

ZHANG Xue-hong1,2, LUO Lai-tao 1   

  1. 1. Department of Chemistry, Nanchang University , Nanchang 330047, Jiangxi, P. R. China;
    2. Nanchang Institute of Aeronautical Technology, Nanchang 330034, Jiangxi, P. R. China
  • Received:2004-08-01 Revised:2004-09-08 Online:2005-01-23 Published:2005-01-23

摘要: 以氯化十六烷基吡啶为模板剂,在室温下直接合成出介孔TiO2,探讨了合成条件的影响,分别用红外光谱(FT IR)、热分析(TG DTA),X射线粉末衍射(XRD)和N2吸附等温线技术对产物进行了表征.结果表明:样品经均三甲苯和磷酸处理后能有效提高比表面积和热稳定性,具有较高的光催化活性.

关键词: 介孔TiO2, 氯化十六烷基吡啶, 模板剂

Abstract: Using n-cetylpyridinium chloride as template, mesoporous TiO2 was prepared by direct synthesis at room temperature. At the same time,the effect of synthesized conditions on samples were studied. The samples were characterized by FT-IR, TG-DTA, XRD, and N2 adsorption techniques respectively. The results show that specific surface and thermal stabability are improved by using mesitylene and phosphoric acid. At the same time, it can exhibit the better photoreactivity.

Key words: mesoporous TiO2, n-cetylpyridinium chloride, characteristics, template

中图分类号: