影像科学与光化学 ›› 1992, Vol. 10 ›› Issue (4): 368-370.DOI: 10.7517/j.issn.1674-0475.1992.04.368

• 研究简报 • 上一篇    下一篇

用铜物理显影的多级放大成像过程——Ⅱ.获得能导电的影像

韩新民1, 庄思永1, 任新民2   

  1. 1. 中国科学技术大学近代化学系, 合肥 230026;
    2. 中国科学院感光化学研究所, 北京 100101
  • 收稿日期:1991-08-21 修回日期:1992-06-04 出版日期:1992-11-20 发布日期:1992-11-20
  • 通讯作者: 庄思永
  • 基金资助:
    国家自然科学基金

AN IMAGING PROCESS WITH MULTI-STAGE AMPLIFI-CATION BY COPPER PHYSICAL DEVELOPMENT Ⅱ.PRODUCTION OF ELECTRICALLY CONDUCTIVE IMAGE

HAN XIN-MIN1, ZHUANG SI-YONG1, REN XIN-MIN2   

  1. 1. Department of Modern Chemistry, University of Science and Technology of China, Hefei 230026, P. R. China;
    2. Institute of Photographic Chemistry, Acadcmia Sinica, Beijing 100101, P. R. China
  • Received:1991-08-21 Revised:1992-06-04 Online:1992-11-20 Published:1992-11-20

摘要: 前文[1]中我们报道了利用铜物理显影的多级放大成像过程能够明显地提高影像密度,从而大大提高了感光材料的感光度或者大幅度地降低感光材料的用银量,并且可以达到特高反差和特短趾部等特殊效果。本文介绍铜物理显影多级放大成像过程的另一种应用:在乳剂层表面或绝缘材料表面上定域沉积能导电的铜影像,为将感光胶片直接用于轻印刷以及制作印刷电路板开辟了新途径.

关键词: 铜物理显影, 多级放大, 定域无电沉积, 导电铜影像

Abstract: Two new techniques of area-selective metal deposition on dieletric surface by means of copper physical development were developed.One of them is to make the area with normal silver image electrically conductive, and the other is to make the area without silver image electrically conductive.The techniques can be used in the manufacture of printed circuit board, lithographic printing plates, broad parallel cables and bright copper mirror on dielectrics.Some factors that influence copper physical development were discussed.

Key words: copper physical development, imaging process, area-selective metal deposition, electrically conductive copper image