[1] 魏杰,金养智.光固化涂料[M].北京:化学工业出版社,2005.Wei J,Jin Y Z.UV-curable Coatings[M].Beijing:Chemical Industry Press,2005.
[2] 杨建文,曾兆华,陈用烈.光固化涂料及应用[M].北京:化学工业出版社,2004.Yang J W,Zeng Z H,Chen Y L.Photo-curable Materials and Application[M].Beijing:Chemical IndustryPress,2004.
[3] 陈用烈,曾兆华,杨建文.辐射固化材料及其应用[M].北京:化学工业出版社,2003.Chen Y L,Zeng Z H,Yang J W.Irradiation Curing Materials and Applications[M].Beijing:Chemical Indus-try Press,2003.
[4] 王德海,江棂.紫外光固化材料——理论与应用[M].北京:科学出版社,2001.Wang D H,Jiang L.UV-curable Materials—Theory and Application[M].Beijing:Science Press,2001.
[5] Crivello J V,Dietliker K.Chemistry&Technology of UV&EB Formulation for Coatings,Inks&Paints[M].London:Sita Technology,1998.
[6] Fouassier J P.Photoinitiator,Photopolymerization and Photocuring:Fundamentals and Applications[M].New York:Hanser Publishers,Munich Vienna,1995.
[7] 彭菊芳.涂料产品中的VOC定义及测定方法[J].涂料工业,2004,34(1):30-33.Peng J F.Review of the definition of VOC in coatings products and determination methods[J].Paint&Coat-ings Industry,2004,34(1):30-33.
[8] 张少梅,沈晋明.室内挥发性有机化合物(VOC)污染的研究[J].洁净与空调技术,2003,3(3):1-4.Zhang S M,Sheng J M.Research on the volatile organic compound(VOC)pollution[J].Contamination Control&Air-Conditioning Technology,2003,3(3):1-4.
[9] 李辰,梁冰,师彦平,等.室内空气中挥发性有机化合物污染及检测方法[J].分析测试技术与仪器,2005,11(1):39-45.Li C,Liang B,Shi Y P,et al.The pollution and the detection method of volatile organic compounds in indoorair[J].Analysis and Testing Technology and Instruments,2005,11(1):39-45.
[10] 张鑫塘,王姝,程秀敏,等.水性涂料中挥发性有机化合物的测定方法探讨[J].涂料工业,2002,32(11):42-44.Zhang X T,Wang S,Cheng X M,et al.Discussion of determination methods of VOC in waterborne coatings[J].Paint&Coatings Industry,2002,32(11):42-44.
[11] 章博,庞奇志.室内挥发性有机化合物污染及预防措施[J].中国环保产业,2004,(5):22-23.Zhang B,Pang Q Z.Indoor contamination and their preventive measures on volatile organic compounds[J].China Environmental Protection Industry,2004,(5):22-23.
[12] 尹建武,曹磊.不同VOC含量的涂料应选择相应的检测标准[J].中国涂料,2003,18(5):45-46.Yin J W,Cao L.Coatings with different VOC content should use corresponding testing standard[J].ChinaPaint,2003,18(5):45-46.
[13] 陈立军,陈丽琼,张欣宇,等.气象色谱分析法在涂料中的应用[J].涂料工业,2007,37(7):54-56.Chen L J,Chen L Q,Zhang X Y,et al.Application of gas chromatographic analysis method in coatings[J].Paint&Coatings Industry,2007,37(7):54-56.
[14] 王浩铭,阮圣平,彭增辉,等.聚合物分散液晶(PDLC)材料的光聚合反应[J].高等学校化学学报,2009,30(7):1473-1476.Wang H M,Ruan S P,Peng Z H,et al.Investigation on the photo-polymerization of PDLC[J].ChemicalJournal of Chinese Universities,2009,30(7):1473-1476.
[15] 王健,王文广,张伟民,等.三嗪类化合物的合成及其产酸性能研究[J].感光科学与光化学,2006,24(6):436-443.Wang J,Wang W G,Zhang W M,et al.Studies of synthesis of triazine derivatives and their properties as pho-toacid generators[J].Photographic Science and Photochemistry,2006,24(6):436-443.
[16] Gu H,Snavely D L.Vibrational overtone activated photo-cross-linking of ethylene glycol dimethacrylate usingbenzoyl peroxide and 2,2-(’azobis)isobutyronitrile as initiators[J].Macromolecules,2003,36(9):3160-3165.
[17] Stansbury J W,Dickens S H.Determination of double bond conversion in dental resins by near infrared spec-troscopy[J].Dent.Mater.,2001,17(1):71-79.
[18] 张静,杨冬芝,聂俊.三官能度甲基丙烯酰氧基单体的合成与性能研究[J].影像科学与光化学,2008,26(5):403-409.Zhang J,Yang D Z,Nie J.Synthesis and characterization of trifunctional methacryloyloxy monomers[J].Im-aging Science and Photochemistry,2008,26(5):403-409.
[19] Pohlers G,Scaiano J C,Step E,et al.Ionicvsfree radical pathways in the direct and sensitized photochemistryof 2-(4-methoxynaphthyl)-4,6-bis(trichloromethyl)-1,3,5-triazine:relevance for photoacid generation[J].J.Am.Chem.Soc.,1999,121(26):6167-6175.
[20] 葛春丽,何勇,聂俊.环氧丙烯酸酯混杂体系光聚合动力学及其力学性能的研究[J].电镀与涂饰,2009,28(9):65-69.Ge C L,He Y,Nie J.Photopolymerization kinetics and mechanical properties of ultraviolet-curable epoxy-ac-rylate blend system[J].Electroplating&Finishing,2009,28(9):65-69.
[21] Jin R G,Hua Y Q.Polymer Physics[M].Beijing:Chemical Industry Press,2000.103-112.
[22] 李振风,杨冬芝,聂俊.吗啡啉基-N-甲酸-丙烯酸乙二醇酯光聚合动力学的研究[J].信息记录材料,2008,9(3):13-16.Li Z F,Yang D Z,Nie J.Photopolymerization of 2-(acryloyloxy)ethyl morpholone-4-carboxylate[J].Infor-mation Recording Materials,2008,9(3):13-16. |